OVERVIEW
- 9 different programmable channels,
- Ability to process films up to 43 cm wide,
- Processing capacity of 33 films/hour (When using 35x43cm film at recommended settings),
- Compact design for small and medium-sized laboratories,
- Developer chemical filter to prevent the formation of unwanted patterns on the film,
- Rinsing with water between the Developer and Fixer tanks,
- Automatic replenishment for Developer and Fixer chemicals,
- Heating system for Developer and Fixer chemicals,
- Anti-crystallization and anti-oxidation cycle system,
- Separate drainage for Developer, Fixer and water waste,
- Water temperature sensor,
- Improved water temperature system,
- Pre-configured unit with fittings to simplify installation of an optional external cooling,
- Automatic water tank filling at device start-up.
TECHNICIAL SPECIFICATIONS
Application
Product Description: Medium capacity desktop automatic film processing machine for general NDT applications
Application Place: It is designed for fixed laboratory installation.
Film
Film Types: NDT Roll and Sheet Films
Recommended Developer Time and Temperature: 110 seconds Developer time at 28°C
Processing Capacity: 33 films/hour 35x43cm film (110 seconds Developer time)
Film Thickness: 0.10 - 0.18 mm
Min. Film Length: 10 cm
Film Width: 7 - 43 cm
Duration / Speed
Total Cycle Time: 3.9 - 11 min (7 min 110 sec Developer time)
Input Speed: 39.6 - 14 cm/min (22cm/min, 110 seconds Developer time)
Developer Time: 60 - 170 seconds (22cm/min 110 seconds Developer time)
Film Transfer
The transition from Developer to Fixer Tank: Transition rollers with water rinsing system to minimize the mixing of developer chemical into the Fixer tank